Bijlage 3 Productbrochure

SlimLine 38 Light, Elegance and Comfort

SlimLine 38 is a highly insulated system inward and outward opening windows and doors, which combines elegance and comfort, with a unique design. This special slender steel look is the perfect solution for modern architecture and renovation of steel-framed windows, respecting the original design but offering a thermally improved solution. The SL 38 system is available in 3 different minimalistic design variants, Classic, Ferro and Cubic, to perfectly match the architectural aspect of the building. The windows and doors can be provided with double and triple glazing without losing the ultra-slim look. In combination with its superior insulation capabilities, the system provides the perfect harmony between durable material, clean design and demanding architectural challenges.

SLIMLINE 38

TECHNICAL CHARACTERISTICS Design variants Min. visible width inward opening window

Min. visible width outward opening window

Min. visible width inward opening window-door

Min. visible width outward opening window-door

CLASSIC

CUBIC

FERRO 33.5 mm

Frame

33.5 mm

33.5 mm

Vent

23 mm

22 mm

21.5 mm

Frame

29 mm

-

18.5 mm

Vent

60.5 mm

-

60.5 mm

Frame

33.5 mm

33.5 mm

59.5 mm

Vent

52.5 mm

52.5 mm

52.5 mm

Frame

29 mm

-

18.5 mm

Vent

82 mm

-

82 mm

48 mm

48 mm

48 mm

99 mm

76 mm

76 mm

Min. visible width T-profile Overall system depth window

Frame

86 mm

75 mm

72 mm

Rebate height

Vent

13.5 mm

13.5 mm

13.5 mm

Glass thickness

up to 55 mm

up to 55 mm

up to 55 mm

Glazing method

dry glazing with EPDM or neutral silicones

Thermal insulation

omega-shaped fibreglass reinforced polyamide strips (frame 40 mm – vent 32 mm)

High Insulation variant (HI)

available

available

available

PERFORMANCES ENERGY Uf-value down to 1.7 W/m²K depending on the frame/vent combination and the glass thickness. Uw of less than 1.4 W/m²K for a standard window section(²)

Thermal Insulation (1) EN ISO 10077-2 COMFORT Acoustic performance(3) EN ISO 140-3; EN ISO 717-1

Rw(C;Ctr) = 38 (-1; -4) dB / 45 (-1; -5) dB, depending on glazing type

Air tightness, max. test pressure(4) EN 1026; EN 12207

(150 Pa)

Water tightness(5) EN 1027; EN 12208 Wind load resistance, max. test pressure (6) EN 12211; EN 12210 Wind load resistance to frame deflection(6) EN 12211; EN 12210

1

1A

2

2A

(0 Pa)

3

(300 Pa)

(50 Pa)

1

3A

(100 Pa)

2

(400 Pa)

(800 Pa)

4

(600 Pa)

4A

5A

6A

7A

(600 Pa)

8A

9A

E

(150 Pa) (200 Pa) (250 Pa) (300 Pa) (450 Pa) (600 Pa) (1200 Pa)

3

4

(1200 Pa)

A

(1600 Pa)

B

5

Exxx

(2000 Pa)

(> 2000 Pa)

C

(≤ 1/150)

(≤ 1/200)

(≤ 1/300)

RC 1

RC 2

RC 3

SAFETY Burglar resistance(7) EN 1628-EN 1630; EN 1627

This table shows possible classes and values of performances. The values indicated in red are the ones relevant to this system. (1) (2) (3) (4) (5) (6) (7)

The Uf-value measures the heat flow. The lower the Uf-value, the better the thermal insulation of the frame. Window dimension of 1.23m x 1.48m, with glass of 1.1 W/m²K. The sound reduction index (Rw) measures the capacity of the sound reduction performance of the frame. The air tightness test measures the volume of air that would pass through a closed window at a certain air pressure. The water tightness testing involves applying a uniform water spray at increasing air pressure until water penetrates the window. The wind load resistance is a measure of the profile’s structural strength and is tested by applying increasing levels of air pressure to simulate the wind force. There are up to five levels of wind resistance (1 to 5) and three deflection classes (A,B,C). The higher the number, the better the performance. The burglar resistance is tested by static and dynamic loads, as well as by simulated attempts to break in using specified tools. This variant requires specific burglar resistance accessories.

REYNAERS ALUMINIUM NV/SA • www.reynaers.com • info@reynaers.com 10/2019 – 0H0.10C2.00 – Publisher Responsible at Law: E. Fonteyne, Oude Liersebaan 266, B-2570 Duffel